Final QUIZZES ewis

Final QUIZZES ewis

Time limit: 0

Quiz Summary

0 of 12 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 12 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10
11
12

Current
Review
Answered
Correct
Incorrect

Question 1 of 12

1. Question
1. The acronym EWIS stands for
- Electronic Wiring Interconnection System
- Electrical Wiring Interconnection System
- Electrical Wireless Interconnection System
Correct

Incorrect
Question 2 of 12

2. Question
2.The acronym ESD stands for
- a.Electro Static Discharge
- b.Electrostatic Sensitive Device
- c.Electrolytic Simulated Device
Correct

Incorrect
Question 3 of 12

3. Question
3. An example of potential EWIS external contamination source is
- a.Engine Oil
- b.De-Icing Fluid
- c.Dust
Correct

Incorrect
Question 4 of 12

4. Question
4. Primary bonding conductors provide protection from
- a. Global warning
- b. Lightning Strikes
- c. Electromagnetic Radiation
Correct

Incorrect
Question 5 of 12

5. Question
5.What is EZAP(Enhanced Zonal Analysis Procedure)?
- a. is a method of analyzing airplanes zones, with an emphasis on wireless systems
- b. is a method of analyzing airplane zones, with an emphasis on wiring systems
- c. is a method of analyzing airplanes zones
Correct

Incorrect
Question 6 of 12

6. Question
6.Which is the first sequence of actions if contamination occur?
- a. Apply the correct cleaning procedure
- b. Keep the contaminated area to a minimum
- c. stop contamination
Correct

Incorrect
Question 7 of 12

7. Question
7.A General Visual Inspection (GVI) requires
- a. Note that for a GVI it is necessary to be within touching distance of item or area to be inspected!
- b. A General Inspection as a minimum from the ground
- c. the Mandatory use of a torch & mirror
Correct

Incorrect
Question 8 of 12

8. Question
8.A Zonal Inspection may be described as
- a. A zonal inspection is essentially a General Visual Inspection (GVI) of an area or zone to detect obvious unsatisfactory conditions and discrepancies
- b. A General Visual Inspection (GVI), it is not directed to any specified component or assembly.
- c. Both a & b are correct
Correct

Incorrect
Question 9 of 12

9. Question
9.EWIS Training criteria is specified in
- a. AMC 20-22
- b. AMC 20- 21
- c. AMC 20 – 23
Correct

Incorrect
Question 10 of 12

10. Question
10.A Detailed Inspection (DET)
- a. is a visual inspection in which a component or assembly is checked
- b. can be more than just a visual inspection since it may include tactile assessment in which a component or assembly is checked for tightness/security
- c. A DET inspection must include a tactile assessment
Correct

Incorrect
Question 11 of 12

11. Question
11.Good housekeeping ensures a safe operating environment for personnel, and is effective in preventing inadvertent damage to aircraft systems and wiring. Contamination sources are divided into 3 areas
- a. External, Internal, Other
- b. General, Detailed, Zonal
- c. Engine, Airframe, Avionics
Correct

Incorrect
Question 12 of 12

12. Question
12.Bonding is the electrical interconnection of metallic parts of an aircraft, normally at earth potential, for the safe distribution of electrical charges and currents.
- a. TRUE
- b. FALSE
Correct

Incorrect

Scroll to Top

Scroll to Top

Login

Accessing this course requires a login. Please enter your credentials below!

Username or Email Address

Password

Remember Me

Lost Your Password?